Prevista Dry fixing set
Product information
Prevista Dry fixing set
Single mounting of Viega Prevista Dry elements on a solid wall
Trade mark rights exist for this document; for further information, go to viega.com/legal .
Target groups
The information in this instruction manual is directed at the following groups of people:
Heating and plumbing experts and trained personnel
Individuals without the abovementioned training or qualification are not permitted to mount, install and, if required, maintain this product. This restriction does not extend to possible operating instructions.
The installation of Viega products must take place in accordance with the general rules of engineering and the Viega instructions for use.
Labelling of notes
Warning and advisory texts are set aside from the remainder of the text and are labelled with the relevant pictographs.
DANGER!
This symbol warns of possible life-threatening injury.
WARNING!
This symbol warns of possible serious injury.
CAUTION!
This symbol warns of possible injury.
NOTICE!
This symbol warns of possible damage to property.
INFO!
This symbol gives additional information and hints.
About this translated version
This instruction for use contains important information about the choice of product or system, assembly and commissioning as well as intended use and, if required, maintenance measures. The information about the products, their properties and application technology are based on the current standards in Europe (e.g. EN) and/or in Germany (e.g. DIN/DVGW).
Some passages in the text may refer to technical codes in Europe/Germany. These should serve as recommendations in the absence of corresponding national regulations. The relevant national laws, standards, regulations, directives and other technical provisions take priority over the German/European directives specified in this manual: The information herein is not binding for other countries and regions; as said above, they should be understood as a recommendation.
Standards and regulations
The following standards and regulations apply to Germany / Europe and are provided as a support feature.
Regulations from section: Fields of application / Mounting conditions
Scope / Notice | Regulations applicable in Germany |
|---|---|
Suitable masonry walls | EN 1996‑1‑1 |
Suitable concrete walls | DIN 1045 |
Product description
Overview
- 1 Cap
- 2 Slide
- 3 Mounting bracket
- 4 Dowels and screws for wall mounting
- 5 Threaded rods
Handling
Assembly
Mounting the fixing set
INFO!
Mount the elements as shown by way of example of the Prevista Dry WC element with shower WC connection and variable ceramic height (model 8521).
-
Determine and mark the fixing points.
X1: depending on the element used.
X2: depending on the element used.
-
Drill the holes.
-
Insert the dowels.
-
Mount the mounting bracket.
-
Loosen the feet of the element using a fork spanner (size 13).
-
Adjust the construction height of the element in accordance with the on-site marking of the upper edge of the finished floor.
-
Tighten the feet of the element using a fork spanner (size 13).
-
Align the depth of the element.
X4: depending on the element used.
-
Mark the fixing points on the floor.
-
Remove the element and drill the floor holes.
-
Insert the dowels.
-
Fix the element in the floor.
-
Push the mounting bracket through the element on the threaded rods.
-
Align the element and use the lock slide to fix the mounting brackets to the threaded rods.
-
Loosely insert the caps.
INFO!Do not press on the caps to engage them.
-
Re-adjust the alignment of the element using the threaded rods.
-
Push the caps down until they engage.
Disposal
Separate the product and packaging materials (e. g. paper, metal, plastic or non-ferrous metals) and dispose of in accordance with valid national legal requirements.